Pendulum / Inclination Sensor
- Precision tilt or pendulum switch / sensor
- Applicable as e.g. acceleration sensor
- Variable switching angle depending on installation
- Suitable to be soldered
Different applications, when an exact switching angle is required. The inclination setting can be adjusted directly on the circuit board or application. The oil damping makes the sensor insensitive to vibrations.
|Contact arrangement||1 FA / NO|
|Min. differential switching angle||[°] 3|
|Max. switching voltage||[V]||100|
|Max. switching current||[mA]||400|
|Max. carrying current||[mA]||1000|
|Max. switching capacity||[W/VA]||10|
|Max. contact resistance||[mOhm]||300|
|Min. insulation resistance||[Ohm]||109|
|Operating temperature range||[°C]||-40…+125|
RELATION ACCELERATION / ANGLE
5601.2003.201 (standard type)
ACCESSORIES & SPECIALS
Sensor with connecting cords.
We assist you with difficult applications!
At a specific angle, the reed switch is activated. By changing the position of the sensor on the object, the switching angle can be changed.
Acceleration will activate the pendulum. The switching activating point corresponds to a specific deflection ß and thus to a specific acceleration. The acceleration can be calculated according to the following formula:
a = tanß * g
If the switching angle at a specific acceleration is needed, the following formula is applicable:
ß = arctan a * g
ß = Switching angle
a = Acceleration
g = Gravity acceleration (9,81 m/s2)
The inclination of the object influences the acceleration!
The sensor is filled with silicon oil!